The technology of gluing walls with wallpaper is very simple, you just need to understand it. Before work, it is worth determining the type of walls and the functionality of the room. For the bedroom, children’s room and living room, it is better to use “breathing” wallpaper: non -woven, vinyl and paper.
Washing and glass wallpaper (fire resistant) are used in the bathroom and kitchen). Also, textile wallpaper, for example, velor.
Before the start of pasting the walls, the corners are removed. After the cracks are poking, then 2 layers of putty are applied, each of which is dried.
Next, the walls are primed and dried approximately 5-6 hours. At this moment, we prepare wallpaper for use. Based on the pattern at the joints of the wallpaper, a length of length is made about 5-10 cm. The wallpaper on the back of the back is marked in order. A number of layers are laid on polyethylene, moving to the side by 1-2 cm.
We determine the place of the beginning of the pasting based on the features of the room and the type of wallpaper. You should move from the center to the exit (the center is a window or the opposite wall). It is necessary to set a vertical line. At once lubricate with glue 2 stripes of wallpaper so that during gluing one strip, the second is saturated. Immediately before pasting, an additional layer of glue is applied. First, the wallpaper line is expelled and the air is distant, with smoothing the wallpaper with a cloth or sponge. The smeared wallpaper is added to the accordion so that the glue is from the inside. The upper end remains free. Rising and putting the top of the wallpaper to the wall, slowly we dissolve the accordion. The pattern is jointed by the joint in the junction. Then the air is driven from top to bottom. The main thing is that during the work of the Shuko window are closed.