The installation of a warm floor occurs in several stages, in the presence of proper experience, this procedure should not cause any difficulties. If the installation of a warm floor takes place in Khrushchev, first of all, the old floor should be dismantled. Then the surface is aligned with a concrete screed. The next stage includes laying thermal insulation on an even concrete floor. It is very important that there is no difference in heights and irregularities on the floor, and the heat insulator is made of high -quality material, for example, from folgaisolom or polypenolate. During the repair process, you may need Tecofi reinforcement, which is installed on units or pipelines, and controls the flows of the working environment, while changing the width of the aisle. Reinforcement can be shut -off, safety, regulatory, divert.
Then the cable is laying if it is a warm electric floor or metal -plastic pipes if it is a water floor. The electric cable is laid by zigzags at a distance of up to twenty cm from each other along the guides. During the laying of the cable, it is important to ensure that there are no excesses and any other sprains or damage to the cable.
When a cable and a thermostat are installed, a concrete screed is laid on top, then you can engage in work that are associated with flooring. When choosing a particular flooring, it is necessary to clarify how much the material is compatible with the warm floor and what maximum temperature can withstand this coating.