If you are going to equip your house with a gas heating system, then for its design you need to know some main points. Namely, full awareness of the internal structure of the chimney itself. To figure it out better, let’s take a gas system for a gas system designed for a stainless steel gas boiler as a visual sample. Here you need to find out what components are included there and the purpose of each of them.
At the very top is a deflector that is needed so that atmospheric precipitation cannot penetrate the chimney. It is two types, conical and anti -anti.
So that the chimney holds well on the roof, it is necessary to fix it using a special roofing element. It also serves for fire safety.
The most basic element in the chimney is a sandwich chimney, which is composed of individual parts that can have different sizes. These details are mounted with each other as a pyramid and their fastening is carried out due to clamps.
To ensure the fire safety of the chimney in the inter -story space of a multi -storey building, special transitions are placed.
Steel bends are needed to carry out the laying of a chimney with a bend or at an angle. There are the following corners of the turn: 15-30-45-90 degrees.
And so that condensation does not accumulate inside the chimney, tees are used. This is extremely necessary, since hot gases, when passing through the cold space, secrete moisture, which settles on the inner surface of the chimney. Then this water is removed through the dropper.
The entire chimney system is fixed on a special mount, which is located in the lower part, usually after the tee.
And the connection of the chimney with the boiler is carried out due to the adapter.
This small instruction will help you better navigate in the details of this system and will become an indisputable help in their choice when buying and designing.