If you observe the dosage during the compilation of the solution, then the tile should stick at the proper level, however, if you allow at least small blots, it can fall off. In this case, you will have to repair the surface that was trimmed with tiles. Such a question, how, what to do if the tile is falling off, is now quite relevant, because problems with tiles are quite often found.
Description of the article:
Now, while working with tiles, special dry mixes are actively used, for example, glue for ceramics. Different mixtures can have differences in the recipe, the volume of special additives and, of course, cost. In this case, the more expensive mixture will not always be the highest quality. All dry mixtures have similar properties, despite the differences in the chemical composition.
Using special mixtures
Such mixtures are very convenient to work, because before using them you need to simply dilute with water in a specific proportion. For this reason, if the tile is falling off, then you can try to attach it back with such special mixtures. The finished adhesive composition is kept on the surface for a long time for a long time, while providing an obstacle to the mechanical destruction of the surface of the walls and tiles, as well as ensuring reliable protection against moisture. In addition, during the application of glue, no lumps are obtained, and it also does not flow out, which is especially an important factor in working with tiles.
Tile laying technology
For this reason, if the tile is dropped, then it is necessary to clean the surface, remove the remains of the old solution from there and stick the tiles in a new way, but with the help of such glue or a special dry mixture. Special chemical additives included in the adhesive composition give a guarantee of strong fixation of the tiles even in an aggressive environment and even when fixing it directly on a brickwork. You can use a special gravitated adhesive composition to repair tiles. It is important to remember when working with him that it dries very quickly, which is which it is recommended to apply it to the surface for no more than a quarter of an hour.
If the room is increased in humidity, then you can stick the tiles on a special waterproofing glue, which will exclude the possibility of falling tiles in the future.