Due to the climatic conditions of Russia, the question of insulation of the house is very relevant, because thanks to such repair work it becomes possible to live year -round.
How previously people lived in Rus’ without insulation of the outer part of the house from a bar in Petrozavodsk, and at the same time there were several hundred years at home?
In the distant past, all carpentry work was preferably carried out with an ax, because due to its processing, the tree was clogged and less absorbed moisture. While the sawn forest allows you to absorb moisture much more, which led to the decay process. As a rule, the thickness of the log was large enough to hold the heat as much as possible.
The pluses of insulation of the outer part of the house from the beam
In order for the internal climate of the house to be optimal, the construction of the house should be from a beam with a thickness of at least 40 cm. But in modern houses a beam of 15 cm is used, which leads to a solution of insulation of the room both outside and from the inside. The advantages of external insulation are more than relevant:
The work is done autonomously, without interfering with the everyday affairs of the owners;
Insulation can be performed independently;
The option of decorating the facade is possible;
The heat inside remains;
Good protection against adverse weather.
If you decide to insulate the outer part of the house from the beam, then you should know that today the market is full of a wide variety of materials. However, it is important to first pay your attention to the thickness of the insulation, its quality and price. Try to compare the characteristics of thermal conductivity, strength, elasticity, features when installing different manufacturers, and you will certainly decide on the choice.
Stages of insulation of a house from a bar
In order for the insulation of the house from the beam to be performed at a high level, it is necessary to adhere to several stages. First of all, it is important to vertically fill the crate on the outer wall with a thickness of 40-50mm. A vapor barrier membrane is attached to the boards, which will prevent the passage of water through the thickness of the beam. After this stage, it is necessary to fill the boards again at the previous one at a distance that is suitable for your insulation material. We attach the insulation between the bars and fasten the membrane that will protect from the wind. The final stage is the mounting of the cladding.
After performing all the stages of insulation of the outer part of the house from the beam, you will make sure that your comfort level has increased markedly.