Many owners of houses who want to get reliable, durable and well -looking roofs today turn to the use of metal tiles. Thanks to this material, you can get a very high -quality roof without special problems that can last a long time. But it must be borne in mind that without observing all the intricacies of the installation of a metal tile, this cannot be achieved.
Laying the material is not too complicated. It is enough to use a screwdriver and metal cutting tools. A hammer can also be useful. Measurements are carried out using a simple roulette. To apply the markup, a marker is used. Having prepared all this and fasteners, you can start.
There is no special difference where to start the installation of a metal tile. The most important thing is that in the end the sheets in the lower part of the slopes are put under those that are fixed above. Then the metal tile will provide water and snow. Elements of roofing material are attached to the skate using self -tapping screws. Also, in places of overlapping of sheets, it is necessary to consolidate.
To take out a metal tile for the cornice by about 4 cm. But here much more depends on whether the blind area is made under the house. If it is not, you need to do more. Each of the layers of the roof must be trimmed in such a way that in the end the lower edge of the metal tile is in parallel with the edge of the roof.
On sheets of metal tiles of some species there may be a protective film. Before performing installation, it needs to be removed. If the work is done correctly, the owner of the house will get rid of problems with the roof for a long time. Among the advantages of the use of metal tiles, you can call the ability to make the roof a strong, beautiful, well protecting the house from the weather. Therefore, you should not refuse this option.