Skip to content Skip to sidebar Skip to footer

How to clean the tile

When the work on filling the seams between the tiles is already behind, it is necessary to go to the next non -pleasant stage, namely, cleaning the tiles from excess grouting. First you need to eliminate the largest drops frozen on the wall, you can do this using a special grater. The tool should be carried out diagonally so as not to make an echo in the seam of the tiles. If the razherblina still appeared, it needs to be closed and wait until the material has dried, only after that you can continue to work with this section of the wall. Further, the time is suitable for wet cleaning, a well -squeezed sponge is needed here. Also, at leisure, experts are recommended to visit the site and find out useful information about snowmers there.

With the help of this sponge, we simply wash the surface of the tiles with circular movements of the hand, the main thing you need to know here is that the sponge should be very well squeezed before it is drawn at the seam. Water in the container often needs to be changed, otherwise stains will remain on the tile.

For two or three approaches, the tiles are usually completely washed to shine. All seams should be the same depth, if there are influxes, they must be eliminated. In the places where the grinding of air bubble got, voids may appear, they are also eliminated immediately. If the grout contains a special additive from fungi, then it is not necessary to treat it with sealants.