Putty is called paste or powder from a mixture of chalk, gypsum and astringent. Used when leveling walls and other surfaces. And during repair work it is necessary to clean the walls of the old putty layer. In order to make high -quality cleaning you will need a grinding machine, spatula, chisel, coarse -grained sandpaper and starch. Unnecessary newspapers, film and roller will also come in handy. The process of removing the old putty layer is simple, but at the same time very dusty and dirty. Therefore, it is advisable to start working in a mask and gloves, remove furniture, and cover the floors with old newspapers.
Today, flower delivery is one of the most popular services. If you are interested in flower delivery in Kyiv, we advise you to visit the Buyflowers website. On the site you can order courier delivery of flowers at competitive prices.
It is unlikely to be cleaned with a spatula or scraper for the first time, since putty is a very persistent material. Therefore, you need a starch solution. It is prepared as follows: add 2 tablespoons of starch to a liter of warm water and stir until a homogeneous state. Wet the roller and draw 2-3 times on the surface, then wait 30 minutes. Next, remove the putty with a wide spatula from top to bottom. If the thickness of the layer is more than 1 cm, then you can’t do without a chipper, hammer or chisel. It is necessary to knock down the old layer at an angle of 45 degrees, starting from those places where the layer is weaker. For alignment we use sandpaper or grinding machine.
And the final step is to wash off the dust and drying of the surface.