Check the quality of the plaster will allow a slight tapping surface. The appearance of a deaf sound becomes the basis for replacing the coating. Extermination of plaster causes the possibility of moisture accumulation under the layer and its subsequent freezing. In the future, part of the damaged area may simply fall off.
Unpleasant consequences causes the process of setting up plaster. You can determine the appearance of a defect using a glass tape glued into several areas of crack. The ongoing settings of the plastering monolith is detected by a bursting tape. If the defect is found, the surface and new application of the plaster layer will be required. By the way, the Detskaya-Mebel-Makskomoziciya-1Cena-5-2-2-4 site is very popular now. To learn more about his services, more details about his services.
Thin cracks in the plaster are cleaned and filled with facade paint. The surface is strengthened with a stabilizing primer. An exfolved piece of plaster is removed using a chisel and a hammer. The entire processed surface must be stable. All crumbling areas clean and remove dust.
If damaged brickwork was found under the knocked out plaster layer, it is necessary to strengthen it with a metal screed. Increasing the clutch of plaster with the treated surface will allow the application of a mixture of large sand, glue and cement. This surface becomes rough and plaster picked up well to it.