Ceiling plinth is the final bar in the repair of the apartment. It is glued when the ceiling is already completely ready. Usually performs in the form of stucco molding and perfectly closes all the joints formed between the stretch ceiling and wallpaper. In addition to stucco molding, in everyday life, many people use a ceiling plinth for stretch ceilings made of polyurethane, which costs much cheaper stucco.
After the installation of a stretch ceiling, it is necessary to fix the result and end the work using a ceiling skirting board. It mainly serves as a decorative element and does not perform special function, except for hiding joints.
What to do with corners?
The answer to this can be found with us if you listen to several of our tips. If you have not acquired separately corners for your room, then you can purchase ordinary rails, because they will be lower in price and from them excellent angles are obtained when docking.
First, combine the drawing, then put the places where you need to cut.
Install the material in a knock at an angle.
Cut the material with a hacksaw.
Form right -sided and left -handed.
So, after cutting, it begins to join. The lower part of the wall will join the ceiling perfectly, but the upper part must certainly be glued to the wall. If the room with even walls and all angles are 90 degrees, then the installation of the skirting board will not be at all difficult. The situation will take shape worse with oblique walls.
For the installation of the conducted for the first time, it is necessary to purchase a skirting board with a margin.
The second method is slightly different, but also quite interesting.
You can simplify your work if you purchase all the finished material in advance, including ready -made corners. They are both internal and external. Several types should be taken. After that, it is enough to use the glue and attach the corners to the right place. Compared to the first way, here all the time to carry out work is reduced several times, due to the fact that there is no need to bother with the cutting of the material.
The third way.
It suggests an option where a filler does not need to be adjusted manually. Actually, what does it mean? The desire to glue the room with the same panels. If you use such a tool as an electrician, then you can use it to make a beautiful even angle with it. At the same time, you can set absolutely any direction, such a cut will not provide a saw. For a stretch ceiling, your ceiling plinth is available and it should not be confused with other varieties, always pay attention to this by making a purchase.