Barus bathhouse. Just a master
Welcome to the pages of the construction portal – just a master! Here you will find information on the following topics: repair, construction, construction companies, interior, design, layout, private houses, apartments, new building, cottage, cottage, apartments, building materials, tools, furniture, windows, doors, floors, ceilings, walls , basement, foundation, bathroom, sewage, heating, air conditioning, electrical wiring, lighting security systems, roof, equipment, loans and loans, mortgages…
Archive
A bathhouse from a bar.
According to the ancient tradition that has developed over the centuries in our country, baths are being built from wood. Explain the choice of this material – the useful healing properties that the wood has. Wood resins and aromas released under the influence of heat are able to create a unique microclimate in the bathhouse. The process of building a bath – laying a profiled beam, respectively, the tradition, occurs in a strict sequence.
The basic equipment (which is mainly selected by customers of construction companies) provides for the thickness of the walls of the bath from 10 cm to 15 cm. Interior decoration is not needed, since the walls from the beam are smooth. The process of erecting baths from a profiled timber takes some time. Before finishing, it is necessary that the walls of walls take place, which takes about a year after the final assembly of the walls.
When installing internal partitions, a beam with a thickness of 10 cm is used, and the floor of the building has a structure of several layers.
To lay the first layer, a black non -coded board 2 cm thick is used. Waterproofing (peramin) is laid on it, then the next layer of thermal insulation is going on. The top layer is a floorboard 2.8 cm thick.
For mounting the roof, corrugated board or other type of roof, as well as a riot from an unspeakable board with a thickness of 2 cm, is suitable. The last stroke is the window windows and the insulated front door.
The process of construction itself consists of such stages:
1. The formation and type of foundation for a bath from a profiled beam depends on its size. Bath 6×6 from the beam and all the buildings of large dimensions implies the construction of a strip foundation. If a smaller bath is planned, it is more advisable to choose a column foundation – its manufacture will cost cheaper.
2. As the basis for the construction on the prepared foundation, a hard overlap from a non -crossed beam is laid. Lags for the floor with a step of 70 cm are formed from the same timber. On the bars attached to the lags, the black layer for the floor lays down. Then all subsequent layers are placed, of which the design of the floor of the bath consists: peramin, thermal insulation, dodged strict boards.
3. Laying a bar of a bathhouse from a profiled beam occurs in a strict sequence. In the process, Lnovatin is used to lay the planes and corners of the log house.
4. The ceiling is formed by laying on the load -bearing walls around the perimeter of the bath of beams and bars with a step of 70 cm. Below the beams are sheathed with lining, and hydraulic – and thermal insulation is laid on top.
5.In the manufacture of the roof, the sheets are laid on the prepared crate and attached by self -tapping screws. Mounted hobby and pediments.
6. Window and door blocks are installed.
7. At the last stage, it is necessary to equip the interior of the bath: shelves, stove and benches.
We advise you to familiarize yourself: