With the onset of cold weather, each owner seriously thinks about how to achieve the creation of a comfortable microclimate in residential premises. Savings heat in the house allows you to warm the floor. For these purposes, polystyrene foam is often used. This is a granular building material, inside which there is gas. His granules are as close as possible to each other. They are pressed under the influence of elevated temperature. This is what provides the material for unsurpassed technical characteristics, see the Evtek website. . .
Advantages
The popularity of polystyrene foam is explained by its following advantages:
Minimum heat conductivity. This is due to the fact that the air inside the material has a weak conduct of heat.
Water resistance. Due to its own unique structure, the material does not absorb moisture. This feature of polystyrene foam will probably be appreciated by the hosts living on the first floors.
Strength. The slabs of this building material are able to withstand increased loads (up to four hundred kilograms per square meter).
Stability in relation to biological influences (fungi, mold, etc.), as well as all kinds of chemicals (acids, nitrates).
Excellent soundproofing. Due to the unique structure, the material can quite effectively absorb sounds.
Resistance to constant temperature drops. In addition, polystyrene foam does not support combustion and instantly fades if you get it out of open flame.
Long period of operation.
Features of use
Despite the fact that the installation of this building material is an extremely simple task, you need to take into account certain nuances:
Small gaps for normal ventilation should be left along the walls.
If you plan to mount the carpet, then as an additional insulation, along with polystyrene foam, you can use sheets of plywood, chipboard, etc.
Before laying the final floor (for example, a parquet board or laminate), the base should be strengthened using a high -quality crate.
You need to lay the slabs as close as possible to each other. The floor screed on this material must be left for a long time (until maximum setting) and only then start the arrangement of the final sex. This guarantees excellent quality and durability of the entire structure.